If you have been shopping for a front entrance, one question almost certainly sits at the top of your list: how much does a double entry door cost? The honest answer is that there is no single figure. A tall pair of solid wood leaves with decorative glass can run well over three thousand dollars, while a factory-made aluminum set for a villa can come in at a fraction of that. The price swings so widely because the total depends on the material, the size of the opening, the hardware, the glazing, and whether you buy through a retailer or straight from the manufacturer.
In this guide we walk through the typical price ranges you can expect, break down every factor that moves the number, and explain why sourcing a modern entry door directly from a factory can change your budget for the better.
A double entry door is simply a front door made of two active (or active plus fixed) leaves that meet in the middle. Because it doubles the framing, glass, and hardware on the opening, it naturally costs more than a single-door setup. As a rough market picture, here is where pricing usually lands for a typical residential pair:
These figures are ballpark numbers, not quotes. Before you commit, it pays to understand what sits behind every price.
This is the biggest single driver. A hollow or thin-profile frame costs less to produce but delivers less strength and insulation. A thermally broken aluminum system built around a high-grade profile such as 6060-T66 performs better and carries a higher price tag. For a double entry door that faces weather day in and day out, investing in a proper system profile pays off over time in comfort and lower energy bills.
The larger the opening, the more aluminum, glass, and hardware are needed. A deeper sill and taller mullions mean more material. If both leaves open rather than one being fixed, you also add a second set of locking points and hinges, which pushes the price up.
Single glazing is the cheapest, but it performs poorly against heat and noise. Double insulated glass with sealed air or gas cavities makes the door markedly more comfortable. If you need extra privacy or solar control, tinted or coated glazing options add a little more again. Spending on good glass is usually money well spent on an entrance.
The locks, hinges, and handles carry a lot of the daily load and matter for security. Entry doors with a single latch are inexpensive but vulnerable. Systems fitted with multi-point locking and reputable mechanisms, such as hardware from German brands like ROTO, Winkhaus, CMECH, or Wehag, cost more because they are engineered and tested to much higher standards.
Standard stock colors and an off-the-shelf size are the cheapest options. Custom dimensions, special color matching, decorative glass, and integrated screens all add to the bill. Decide which details genuinely matter to your project before you ask for extras.
Wood looks timeless but needs regular maintenance and can warp in humid climates. Steel is tough yet prone to denting and can be heavy and cold to the touch. Aluminum, especially a thermally broken aluminum system, gives you a slim, sturdy frame that resists corrosion, holds up in harsh weather, and keeps its appearance for years with very little upkeep.
On many aluminum systems the frame and door are built to a similar engineering logic as the windows, so the whole entrance can be finished with matching profiles and colors. That cosmetic consistency gives a modern entry a clean, seamless look across facades, sidelights, and the entrance itself.
One of the fastest ways to bring the figure down is to remove the middlemen. When you buy through a distributor or retailer, each layer adds a margin on top of what the door actually costs to make. Ordering a double entry door directly from a factory means you pay for the product, the engineering, and the materials, without stacking repeated retail markups.
A manufacturer also has the flexibility to produce the exact size, finish, and hardware configuration your opening needs. This matters on a double-leaf entrance, where off-the-shelf sizing rarely fits a real opening perfectly. Buying factory-direct is also the standard route for contractors, builders, and property developers who are outfitting more than one home and want a consistent spec at a controlled budget.
It is why sourcing from a specialized entry door factory with in-house production capacity is so attractive for international projects. You get the engineering and the customization, without paying the extra margins of a long supply chain.
Because so many variables affect the price, the only reliable way to know what your double entry door will cost is to ask a supplier for a real quote and give them the details upfront:
With these details, a factory can give you a firm number rather than a broad estimate, and you avoid the surprise of add-on charges later.
A double entry door is one of the more visible and hard-working parts of a building. It greets every visitor and takes constant daily use, so it pays to choose quality over the cheapest possible option. Balance material, glazing, hardware, and sourcing to get a door that looks right, performs well, and stays within your budget. By understanding what drives the price and buying from a factory that manufactures rather than simply resells, you can get a durable, well-made entrance without paying for a long chain of markups.
